How to make a laminated recurve bow – Cut the block of maple wood. A maple block will measure 18 inches long by 1.75 inches wide by 0.5 inches thick from the central section of the bow. Two blocks of maple will measure 14 inches long by 1.75 inches wide by 0.5 inches wide by the top of the foot. The last two maple blocks will measure 1.5 cm in length, 0.75 in width and 0.25 in. Deep for the groove string reinforcement. Sand all the pieces to the edges and the surfaces are smooth.
The next steps how to make a laminated recurve bow at final touches is glue the vertical blocks to the fused laminated maple piece, and one of the pieces of laminated cores. Fix the pieces together and allow to dry. Glue the second series of laminations placing the end-to-end pieces in the frame of the lift blocks. A continuous section of 6 feet will formed. Use masking tape to attach the rolled pieces to the desired shape.
12 Photos Gallery of: How To Make a Laminated Recurve Bow at Final Touches
Allow the glue to dry for at least 1 day 1 night. For the first six hours the bow should be exposed to temperatures of 100 degrees F. Remove the tape or bow associations after drying. Measure the length of the bow and mark the center with a pencil. Draw a line in the middle of the arc from end to end. Use a wooden file for the next steps how to make a laminated recurve bow at final touches. Window Form viewpoint and the rest according to your personal interests. Grooves cut at the ends of the bow string with wood files.