Wilsonart laminate countertop edges – Before placing top sheet, cover edges of precut strips laminate worktop edge carefully butt joints in corners. Measure and cut front and side edge strips to length. Apply contact cement to back of each edge strip. And edges of worktop as directed by manufacturer. Then using a nylon brush or a toothed spatula. Let adhesive cure and test for joining arrangement as directed.
Gently press each edge strip in place on cemented counter edge, first side strips. And then compared. Bottom of band should be flush with bottom of tip: let upper edge of strip stick above worktop. You align strip edge as well pressed down once in contact with cemented edge cannot move. Fit strips firmly attached at corners of bar, band front on sides. After applying each strip, go firmly with a roller or a roller to attach firmly to edge counter. And then use of safety glasses, cut top edges of strips projecting edge with a router and some cutting edge of plastic wilsonart laminate countertop edges.
Then with a belt sander and medium cutting edges carefully to them exactly flush with surface of counter belt sanding fine grained sand. If edge strip protrudes only a little, cut router is unnecessary- using belt sander for edges flush. Use a fine-tooth flat file to smooth wilsonart laminate countertop edges in tight spaces.